Maint and Constr Vehicle OBE --> ITS Roadway Equipment:
traffic detector control

Definitions

traffic detector control (Information Flow): Information used to configure and control traffic detector systems such as inductive loop detectors and machine vision sensors.

Maint and Constr Vehicle OBE (Source Physical Object): The 'Maint and Constr Vehicle OBE' resides in a maintenance, construction, or other specialized service vehicle or equipment and provides the processing, storage, and communications functions necessary to support highway maintenance and construction. All types of maintenance and construction vehicles are covered, including heavy equipment, supervisory vehicles, unmanned remote controlled field maintenance robots, and sensory platforms that may be wheeled or low altitude aerial vehicles (e.g. drones, balloons). The MCV OBE provides two-way communications between drivers/operators and dispatchers and maintains and communicates current location and status information. A wide range of operational status is monitored, measured, and made available, depending on the specific type of vehicle or equipment. A snow plow for example, would monitor whether the plow is up or down and material usage information. The Maint and Constr Vehicle OBE may also contain capabilities to monitor vehicle systems to support maintenance of the vehicle itself. A separate 'Vehicle OBE' physical object supports the general vehicle safety and driver information capabilities that apply to all vehicles, including maintenance and construction vehicles. The Maint and Constr Vehicle OBE supplements these general capabilities with capabilities that are specific to maintenance and construction vehicles.

ITS Roadway Equipment (Destination Physical Object): 'ITS Roadway Equipment' represents the ITS equipment that is distributed on and along the roadway that monitors and controls traffic and monitors and manages the roadway. This physical object includes traffic detectors, environmental sensors, traffic signals, highway advisory radios, dynamic message signs, CCTV cameras and video image processing systems, grade crossing warning systems, and ramp metering systems. Lane management systems and barrier systems that control access to transportation infrastructure such as roadways, bridges and tunnels are also included. This object also provides environmental monitoring including sensors that measure road conditions, surface weather, and vehicle emissions. Work zone systems including work zone surveillance, traffic control, driver warning, and work crew safety systems are also included.

Included In

This Triple is in the following Service Packages:

• MC06: Work Zone Management
• MC07: Work Zone Safety Monitoring

This triple is associated with the following Functional Objects:

• MCV Vehicle Safety Monitoring
• MCV Work Zone Support
• Roadway Basic Surveillance
• Roadway HOV Control
• Roadway Incident Detection
• Roadway Work Zone Safety
• Roadway Work Zone Traffic Control

This Triple is described by the following Functional View Data Flows:

• sensor_configuration_data

This Triple has the following triple relationships:

Communication Solutions

• US: NTCIP Transportation Sensors - Wireless SNMPv3/TLS (5)
• (None-Data) - Local Unicast Wireless (EU) (38)

Selected Solution

(None-Data) - Local Unicast Wireless (EU)

Solution Description

ITS Application Entity Development needed			Click gap icons for more info.
Mgmt ETSI 302 890-1 Addressed Elsewhere	Facilities Development needed	Security Bundle: ETSI ITS-S Security Architecture
	TransNet Bundle: GeoNetworking IPv6
	Access Bundle: Local Unicast Wireless SubNet (AU/EU)

Note that some layers might have alternatives, in which case all of the gap icons associated with every alternative may be shown on the diagram, but the solution severity calculations (and resulting ordering of solutions) includes only the issues associated with the default (i.e., best, least severe) alternative.

Characteristics

Security